Zur Druckansicht der News 01/2005    

 

Moteurs fin de série: prix canon!

Moteurs thermiques BUGGY / Car


Réf. PIZ-2100-A, CHF 74.00
Moteur 15 SE, 2,5ccm, carburateur à 2 aiguilles, lanceur, sortie latérale, roulements à billes.
T/Min. 29'400 / H.P. 0.62

Réf. BB-E-21SMC-A, CHF 84.00
Moteur BRAT 3,5ccm, carburateur à tirroir 2 aiguilles, sortie latérale, roulements à billes.
T/Min. 29'400 / H.P. 1.2

Tous les modèles: au lieu de CHF 99.00,
maintenant CHF 39.00

Chaque moteurs est livré avec un diagramme sur la puissance et des recommandations d'utilisation.

moteurs électriques PALICKA Ø 36,6mm à aimants en ferrite avec collecteur gros Ø

MM-VM24-10 / MM-VM24-12 / MM-VM24-16 / MM-VM24-16K /

Réducteur MM-KG3 pour les moteurs Palicka en ferrite


  • frictions minimales – puissance importante – prix avantageux
  • 4 versions pour 5 - 10 éléments
  • réducteur planétaire en alu 3:1 pour serie 600 PALICKA

Réf. MM-VM24-10, PALICKA 600BB

Speed 600 line motor with aproximately 40% higher power output than Speed 600. Gliders - wingspan 1'500 - 2'200 mm, weight up to 2 kg, ACCU 6 - 7 cells 1,0 - 1,7Ah, Aeronaut 9 x 5”, Aeronaut 8 x 5”. Trainers and sport airplanes - wingspan 1'000-1'300mm, ACCU 7 cells 1,0 - 1,7Ah, weight ap to 1'300g, APC 7 x 4”, Aeronaut 9 x 5”, 8,5 x 5”.

SPÉCIFICATIONS:
nominal voltage: 8,4V
operating voltage: 5 - 9V
no load motor speed: 20'600 r.p.m.
r.p.m./volt: 2'500 r.p.m. / V
max. efficiency: 74%
maximum efficiency current: 16A
current capacity: 35A / ½min.
short-circuit current: 86A
dimensions (ODxL): 36,6 x 67mm
shaft diameter: 5mm
weight: 242g
magnet: ferrite
shaft support: 2 x ball bearings
max. weight of model: 2.0kg


en haut


Réf. MM-VM24-12, PALICKA 600BB

Speed 600 line motor with approximately 15% higher power output than Speed 600. Gliders - wingspan 1'500 - 2'200mm, weight up to 2 kg, ACCU 7-8 cells 1-1,7 Ah, APC 9 x 5”, Aeronaut 8 x 5” or 9 x 5”. Trainers and sport airplanes - wingspan 1'000 - 1'300mm, ACCU 7 cells 1-1,7 Ah, weight ap to 1300 g, APC 8x4”, Aeronaut 9 x 5”.

SPÉCIFICATIONS:

nominal voltage: 8,4V
operating voltage: 5 - 9V
no load motor speed: 15'500 r.p.m.
r.p.m./volt: 2'100 r.p.m.
max. efficiency: 73%
maximum efficiency current: 12A
current capacity: 35A / ½min.
short-circuit current: 68A
dimensions (ODxL): 36,6 x 67mm
shaft diameter: 5mm
weight: 242g
magnet: ferrite
shaft support: 2 x ball bearings
max. weight of model: 2.0kg

 

Réf. MM-VM24-16, PALICKA 600BB

Speed 600 and 700 line motor with aproximately same power output like Speed 700. Gliders - wingspan 1'500 - 2'400mm, weight up to 2,5kg, ACCU 8 - 10 cells 1,0 - 1,7Ah, Aeronaut 9 x 5”. Trainers and sport airplanes - wingspan 1'100 - 1'300 mm, ACCU 10 cells 1,0 - 1,7Ah, weight up to 1'500g, APC 9 x 5”, Aeronaut 9 x 5”.

SPÉCIFICATIONS:

nominal voltage: 12V
operating voltage: 8 - 12V
no load motor speed: 19'800 r.p.m.
r.p.m./volt: 1'550 r.p.m.
Max. efficiency: 74%
maximum efficiency current: 10A
current capacity: 30A / ½min.
short-circuit current: 58A
dimensions (ODxL): 36,6 x 67mm
shaft diameter: 5mm
weight: 242g
magnet: ferrite
shaft support: 2 x ball bearings
max. weight of model: 2.5kg

Réf. MM-VM24-16K, PALICKA 500BB Pylon

Electric motor for „500” and pylon aeroplanes. Fast models - wingspan 900 - 1'100mm, ACCU 7 cells 0,6 - 1,7Ah (SCR), weight 1'100g, APC 7 x 4”.

SPÉCIFICATIONS:

nominal voltage: 8,4V
operating voltage: 5 - 8V
no load motor speed: 23.300 r.p.m.
r.p.m./volt: 2'900 r.p.m.
max. efficiency: 68%
maximum efficiency current: 13A
current capacity: 30 A / ½min.
short-circuit current: 62A
dimensions (ODxL): 36,6 x 53mm
shaft diameter: 5mm
weight: 166g
magnet: ferrite
shaft support: 2 x ball bearings
max. weight of model: 1.2kg

en haut

 

RÉF. MM-KG3, réducteur planétaire,
maintenant CHF 49.00

Robuste réducteur planétaire pour tous les moteurs Palicka en ferrite,
rapport 3 : 1 avec diamètre d'axe de Ø 5mm, pignon avec vis 6-pans.


Pignons de rechange :

RÉF. MM-KG3-03: pignon 3 : 1 avec axe de Ø 3.17mm

RÉF. MM-KG3-05: pignon 3 : 1 avec axe de Ø 5mm


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 









en haut

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Imprimer cette page